Lelee Laser America America Lelee Laser France FranceLelee Laser Russia Russia Lelee Laser Spain Spain

    1. Laser Marking Machine LE-DE-100

    2. Our laser deep marking series, equipped with scanning head and engraving software, are made of 1064nm Nd: YAG laser.
      They can operate under the condition of high brightness.
      This series of lasers shows the highest performance of current CW Nd: YAG laser technology.
      The features of these elements are described separately as follows:
      ●High quality luminous point, peak power and the peak to peak stability provide a reliable and repeatable processing
      .●Efficient laser head cooling enables the laser to operate 24 hours a day, 7 days a week.
      ●Our laser marking machine LE-DE-100 has subminiature laser head and power-supply set.
      ●Multifunctional cavity design can be upgraded easily, which can not only keep up with the changing demands, but also prolong the usage life of our lasers.
      ●Stable support base and mechanical assembly help to maintain its reliable performance.
      ●It is hermetically sealed to meet the high requirement on industrial environments.
      ●Exceptional lamp life and lowest operating cost.
      ●Complete operating control and programmability of all laser operating parameters.
      Technical Data of Laser Marking Machine LE-DE-100
      Laser type LE-DE-100
      Laser medium Lamp pumped, 1064 nm
      CW Average Power 100W
      Average Power @ 6kHz 70 W
      Stability +/- 2% (pulse to pulse)
      Electrical connection 220V +/-10%; 25 Amp/phase
      Max. power consumption. 3000 W
      Connecting cables 2 m for electric cables and 3 m I/O cable
      Typical features Laser Deep Engraving System
      Normal depth of engraving Less than 1 mm
      Max marking range 110×110 mm
      Marking lens 1
      Max marking rate 6 KHz/s
      Cooling Require external Chiller, Circulation water
      Other Dimensions (L × W × H;mm) Weight
      3D marking system 850 ×1200 ×1300 Approx 250 kg
      Painting Light white, Customer design
      Documentation 1 x
      Operation demands: room temperature : 18-25℃ room humidity: <60%

    3. Back